[time-nuts] Trimble SMT board

[Azelio Boriani]

A quick look at the Trimble Resolution SMT GPS revealed that the TSIP
packet 0x7A can manage the NMEA output: what sentences and their time
interval so the TrimbleStudio must have that option.

On Mon, Jun 25, 2012 at 1:58 PM, Azelio Boriani <azelio.boriani at screen.it>wrote:

> It's easy: let it run with the power on, what else? What exactly do you
> mean: no PC and what instead of the PC? Trimble products generally use the
> TSIP protocol, not a human readable one like the NMEA. Yes, the NMEA isn't
> easy to read but usually you can figure out date, time, lat/lon and 3D fix
> present or not. With the TrimbleStudio you can configure the GPS to put out
> the NMEA sentences (I think, I have no experience with the SMT but usually
> the GPSes from Trimble can be configured to some extent).
>
>
> On Mon, Jun 25, 2012 at 1:18 PM, Erno Peres <ernieperes at aol.com> wrote:
>
>>
>> Hi,
>>
>> anybody having some experience with this board..????
>>  I have the following problem....after power on the board it  does not
>> output  any msg only if I use the  " TrimbleStudio SMT "  software......on
>> my PC......
>> Is there any solution to use the board without the PC/software ???????
>>
>> Thanks a lot for any usefull advise.
>>
>> Rgds Ernie.
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to
>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>>
>
>