[time-nuts] Trimble SMT board

[Erno Peres]

Azelio,

As I said  NO any type of msg comes out from the board....only When I use the  " TrimbleStudio SMT " software which seems to me it sending some kind of initialization to the board..... 

Rgds Ernie.




-----Original Message-----
From: Azelio Boriani <azelio.boriani at screen.it>
To: Discussion of precise time and frequency measurement <time-nuts at febo.com>
Sent: Mon, Jun 25, 2012 2:06 pm
Subject: Re: [time-nuts] Trimble SMT board


A quick look at the Trimble Resolution SMT GPS revealed that the TSIP
acket 0x7A can manage the NMEA output: what sentences and their time
nterval so the TrimbleStudio must have that option.
On Mon, Jun 25, 2012 at 1:58 PM, Azelio Boriani <azelio.boriani at screen.it>wrote:
> It's easy: let it run with the power on, what else? What exactly do you
 mean: no PC and what instead of the PC? Trimble products generally use the
 TSIP protocol, not a human readable one like the NMEA. Yes, the NMEA isn't
 easy to read but usually you can figure out date, time, lat/lon and 3D fix
 present or not. With the TrimbleStudio you can configure the GPS to put out
 the NMEA sentences (I think, I have no experience with the SMT but usually
 the GPSes from Trimble can be configured to some extent).


 On Mon, Jun 25, 2012 at 1:18 PM, Erno Peres <ernieperes at aol.com> wrote:

>
> Hi,
>
> anybody having some experience with this board..????
>  I have the following problem....after power on the board it  does not
> output  any msg only if I use the  " TrimbleStudio SMT "  software......on
> my PC......
> Is there any solution to use the board without the PC/software ???????
>
> Thanks a lot for any usefull advise.
>
> Rgds Ernie.
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>


______________________________________________
ime-nuts mailing list -- time-nuts at febo.com
o unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
nd follow the instructions there.