[time-nuts] military frequency standard pin out??

Pete Lancashire pete at petelancashire.com
Wed Mar 7 18:16:47 UTC 2012


6625-078-4718   -   * Frequency Standard Module from R-1051* and
RT-618* radios; usable as replacement or adapt to other need where
standard is required. Crystal oven with 5 MHz crystal provides 5 MHz
sine wave output (approx 1.8V) plus possible non-sine outputs dual
500KHz, 1 & 10 MHz. Designed stability: 1 part in 10 / day. Requires
18-24VDC input. 4.4x3x4.5, 2 lbs sh. Used crystal only is checked,
other output may need repair, with schematic,

Found on Fair Radio's site ..

-pete

On Wed, Mar 7, 2012 at 7:45 AM, Paul A. Cianciolo <paulc at snet.net> wrote:
> Hello Folks,
>
>
>
> I found in my collection a frequency standard that I acquired mil surplus at
> one time.
>
> The model number of 2N6625-078-4718  internet search yields nothing on this
> number.
>
> The unit is a common looking one , approx. 4" x 3" x 4" with an aluminum
> cover that comes off.
>
> The cover has the layout of the parts.  The connector has 6 coax outputs
> into a D type connector.
>
> It appears 3 pins for power 1 is ground that easy to see but the others are
>
> 2) a  red white and black that leads to the circuit board
>
> 3) and a brown white and black also leads to the circuit board.
>
>
>
> I would like to fire this up, but not burn it up.
>
>
>
>
>
> Any ideas?
>
>
>
> Thank you
>
>
>
>
>
> Paul A. Cianciolo
>
> W1VLF
>
> http://www.rescueelectronics.com/
>
> Our business computer network is  powered exclusively by solar and wind
> power.
>
> Converting Photons to Electrons for over 20 years
>
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.




More information about the Time-nuts_lists.febo.com mailing list