[time-nuts] FE5680A x-rays

[Erno Peres]

Hi Rich,

please advise which program can I open the files...??????

Rgds Ernie.




-----Original Message-----
From: Rich <msimardn at sympatico.ca>
To: time-nuts <time-nuts at febo.com>
Sent: Tue, Mar 27, 2012 12:24 am
Subject: Re: [time-nuts] FE5680A x-rays


Ok here they are:
About 30 real-time X-ray images were done in transmission
nd the images were captured using the imaging system,
rinted and later assembled to create a one meter scale of
he printed circuit board. A low voltage, in the 50kV range,
as used to better visualise the hidden copper traces.
In the attached file the two directories in "Data" are 
ne: image format in raw (need to be flipped
nd rotated as needed if you want to look up or down at the pc board) and
wo: in the psd Photoshop format.
They can be converted to jpg with a slight loss of 
esolution by many software packages, if
esired. Two other files, in the top level, 
re for guidance in positioning them on the chart and a
ook at the final assembly result (at much lower resolution).
The images are available at: 
ttp://download.muanalysis.com/FE-5680A.zip
EnjoY.... 
 am happy as my unit is now working correctly.
t was an e-bay bargain if you don't count the debug time!!!

ope this info will be useful to others.

______________________________________________
ime-nuts mailing list -- time-nuts at febo.com
o unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
nd follow the instructions there.