[time-nuts] thunderbolt "no UTC offset"

[Azelio Boriani]

In my opinion nothing has to be changed. It is working OK this way. To
improve performance it is worth to use linear regulators for the power
supply +12V and -12V that are related to the OCXO supply and EFC.

On Wed, May 2, 2012 at 9:24 AM, francesco messineo <
francesco.messineo at gmail.com> wrote:

> On 5/2/12, Dennis Ferguson <dennis.c.ferguson at gmail.com> wrote:
> >
> > On 2 May, 2012, at 04:30 , Tom Van Baak wrote:
> >
> >> The UTC offset is in words 6-10, page 18, subframe 4 -- every 12.5
> >> minutes.
> >> /tvb
> >
> > The leap second warning is also in the same place.  How the unit could
> > know that a leap second is pending but not know the UTC offset is a
> > mystery.
>
> that's why I asked in the first place... all was "green" but the leap
> second pending which I'd expected to be there anyway. The UTC offset
> came much time later anyway. I don't know if the tbolt could be
> "confused" or had some firmware issue after being unpowered for some
> months.
>
> By the way, attached is a plot of signal levels with the new antenna,
> I'm interested in opinions about what can be changed in the settings
> to maybe improve performance.
> Thanks
>
> Frank IZ8DWF
> >
> > Dennis Ferguson
> >
> > _______________________________________________
> > time-nuts mailing list -- time-nuts at febo.com
> > To unsubscribe, go to
> > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> > and follow the instructions there.
> >
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>