[time-nuts] Motorola UT+ Oncore GPS Timing Receiver 1ppsR5122U1154

[ken johnson]

If it's of any use to you, here is a link to the layout and parts
placement for a board I designed when I was playing with the oncore
for APRS some years ago. The board is designed so the motorola oncore
plugs in to the top of my board and is secured by 10mm high
stand-offs. My board supplies a regulated 5 volts to the oncore, and
has a max-232 for level translation to the db-9 on the end of the
board. It can also be fitted with a rt angle connector for the 1pps
from the oncore. The .pdf files are at the bottom of this page-

http://www.vk7krj.com/ham_stuff.htm


-- 
Ken.