[time-nuts] GPSTM NTGS50AA Problems
Bob Camp
lists at rtty.us
Tue May 29 16:03:07 UTC 2012
Hi
Most of the Trimble stuff seems to have a "oscillator alarm" that triggers
on high drift or on EFC voltage near the limit. Your OCXO does sound like
it's not working well.
Bob
-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of Rui Martins
Sent: Tuesday, May 29, 2012 8:50 AM
To: time-nuts at febo.com
Subject: [time-nuts] GPSTM NTGS50AA Problems
Hi to all,
I buy one of this to Fluke.l on ebay and I have problems I think with
Trimble oscillator (only works with DAC at 7.2V ) since I think the
reference voltage is not correct.
After a 48 hours survey with lady heather it returns OSC BAD and with
thunderbolt monitor oxco voltage error.
If I use higher tension it sims to work but no phase lock appear.
I try everything including asking help to the seller.
I think it is the the problem is on the OCXO.
Any one to help.
Photos at https://www.dropbox.com/sh/b1kalcfm37pucfz/6wwkIlSLMW
CT1EBH
Rui Jorge Martins
Proudly user of FT-ONE, FT-980, FT736R, FT726R, FT-2000 and FL-7000
73!
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list