[time-nuts] HP Z3801A and Tac32

[Brian Kirby]

Was that aimed at me Bob ?

The article I pointed him to off the list was wrote by me years ago - 
when Time-Nuts was in its infancy - in fact I found Time-Nuts via that 
list (Bill Jones sent me to Tom Van Baak).

I do not believe in duplicating the effort and there were pictures there 
about the modifications required.


Brian Kirby
KD4FM

On 11/13/2012 5:57 AM, Bob Camp wrote:
> Hi
>
> There are a *lot* of places that archive this list. As long as you know roughly when the messages came through, it's not to hard to go dig them up. That's also a good reason to keep things "on list" rather than taking everything off list.
>
> Bob
>
> On Nov 12, 2012, at 8:53 PM, "Merv Thomas" <vk6bmt at iinet.net.au> wrote:
>
>> Hi - Thanks to all for the helpful hints which may enable me to use Tac32. Sorry for a new posting but I had a calamity and somehow deleted all the replies instead of moving them to my Timenuts folder!!
>>
>> I converted the output to the DB25 connector on the back of the unit to RS232 comms but it seems I will have to bring a data stream direct from the GPS module out to a separate connector if I am going to be able to read the data.   Probably will give this a miss as the BDS software does a first class job anyway.
>>
>> Merv  VK6BMT
>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>