[time-nuts] 12.8 MHz OCXO

[Joseph Gray]

David,

Thanks for the links, but none of those meet my 0.25 ppm requirement.

Joe Gray
W5JG

On Sat, Nov 24, 2012 at 1:55 AM, David C. Partridge
<david.partridge at perdrix.co.uk> wrote:
> With only 0.25ppm needed would a TCXO do?
>
> Howsabout this:
>
> <http://www.kuhne-electronic.de/en/products/special-offer/128-mhz-crystal-oscillator-tcxo.html>
>
> or
>
> <http://www1.futureelectronics.com/doc/IQD%20FREQUENCY%20PRODUCTS/E4191LF.pdf>
>
> or even
>
> <http://cgi.ebay.com/310376642284>
>
>
> Dave
> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On Behalf Of Joseph Gray
> Sent: 24 November 2012 08:26
> To: Discussion of precise time and frequency measurement
> Subject: [time-nuts] 12.8 MHz OCXO
>
> Can anyone recommend an inexpensive 12.8 MHz OCXO that outputs a sine wave? I've looked online, but the only ones I find costs hundreds of dollars. Anything 0.25 ppm or better is fine. A Vcc of 5-13.8 VDC preferred.
>
> Joe Gray
> W5JG
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>