[time-nuts] 5061A AC Power connector

Pete Lancashire pete at petelancashire.com
Sun Nov 25 03:40:49 UTC 2012


18-22S is what I needed, now to go into the depths of the garaged and
find the box of MS connectors.

-pete

On Sat, Nov 24, 2012 at 6:35 PM, J. L. Trantham <jltran at att.net> wrote:
> Pete,
>
> In the US, Galco sells a DDK product that works well.  The connector and
> shell are a DMS3106A18-22S.
>
> http://www.galco.com/buy/DDK/DMS3106A18-22S
>
> You will also need a clamp and strain relief.  I use a DMS3057-10A.
>
> http://www.galco.com/buy/DDK/DMS3057-10A
>
> It is the same connector as a 5065A though you have to be careful about the
> wiring.  Some of the 5065A's are the same as the 5061A and others are
> different.
>
> Hope this helps.
>
> Joe
>
> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
> Behalf Of Pete Lancashire
> Sent: Saturday, November 24, 2012 6:51 PM
> To: Discussion of precise time and frequency measurement
> Subject: [time-nuts] 5061A AC Power connector
>
> What is the MS type for the power plug for a 5061A ?
>
> I could not find it in the PDF I have.
>
> -pete
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.




More information about the Time-nuts_lists.febo.com mailing list