[time-nuts] Best counter setting for ADEV?
SAIDJACK at aol.com
SAIDJACK at aol.com
Wed Oct 3 17:04:44 UTC 2012
Hello Kevin
here is the internal cal manual for the 2075. They all calibrate the same
way essentially.
These manuals used to be on the web, and I found the user manual with a
simple Google search:
_http://www.wavecrestdts.com/dts2075.htm_
(http://www.wavecrestdts.com/dts2075.htm)
The software is much tougher to find, contact me off list to discuss.
hope that helps,
Said
In a message dated 10/3/2012 09:08:05 Pacific Daylight Time,
kevin at rosenberg.net writes:
On Oct 2, 2012, at 1:39 PM, SAIDJACK at aol.com wrote:
> 1) calibrate the internal 100MHz vectron OCXO using a small screwdriver,
> this is not really critical though as the unit does not really function
as a
> frequency counter.
>
> 2) Calibrate the power supplies for proper voltages if necessary with
same
> screwdriver, I found that is really not necessary usually
Thanks for those two steps. I've found a copy of the user and GPIB
manuals, but not a service manual. Do you have a service manual that you could
forward to me.
Also, I was interested in the VISI software, but talking with Wavecrest a
few years ago they said that it was no longer supported. Do you know to get
an orphaned copy?
Many thanks and for all of your help thoughts over the years. I'll look
forward to the day and I can afford a GPS disciplined CSAC.
Best,
Kevin
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 2075051C.pdf
Type: application/pdf
Size: 44963 bytes
Desc: not available
URL: <http://febo.com/pipermail/time-nuts_lists.febo.com/attachments/20121003/9af27238/attachment.pdf>
More information about the Time-nuts_lists.febo.com
mailing list