[time-nuts] GPSDO control loops and correcting quantization error
GandalfG8 at aol.com
GandalfG8 at aol.com
Fri Sep 14 22:57:15 UTC 2012
Hi Don,
I don't know if I've misunderstood your question, but as I understand it
the voltage reference output is a fixed voltage from an internal regulator
that can then be used as the supply to an external control circuit.
For example, it could be used as the feed voltage for a variable resistor
that has its wiper connected to the EFC input to allow for manual frequency
adjustment.
When some other form of external control is used, such as a DAC output for
example, it's not uncommon to find the voltage reference output left
disconnected and the control circuit fed from an alternative supply.
Regards
Nigel
GM8PZR
In a message dated 14/09/2012 23:10:59 GMT Daylight Time, eGunk at wowway.com
writes:
Hello all,
Most voltage controlled XOs have a voltage reference output. Is it
necessary for the DAC output / frequency control input, to track this voltage
reference output?
Thank You
Don O'Connor
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list