[time-nuts] Connectors
DaveH
info at blackmountainforge.com
Sun Apr 14 02:08:50 UTC 2013
Kind of a cool technology -- they bombard the outside of the tube with an
electron beam that cross-links the polymer but leaves the inside untouched.
The outside becomes hard but still shrinks. The inside just melts into a
goo when heated.
Dave
> -----Original Message-----
> From: time-nuts-bounces at febo.com
> [mailto:time-nuts-bounces at febo.com] On Behalf Of Peter Gottlieb
> Sent: Saturday, April 13, 2013 15:24
> To: time-nuts at febo.com
> Subject: Re: [time-nuts] Connectors
>
> Think of heat shrink with a layer of hot melt glue on the
> inside. Such stuff is
> used in most outdoor and especially underground utility
> wiring. Shrink the
> tubing and it melts the glue and the contracting tubing
> forces the glue into
> every crevice making a great waterproof splice.
>
>
> On 4/13/2013 5:07 PM, Hal Murray wrote:
> >> Can someone in the know clarify this?
> > I'm not in the know.
> >
> > Several years ago, I found a short chunk of coax that the
> cable TV guys had
> > left on the ground. It included a piece of heavy wall
> shrink tubing. There
> > was a layer of sticky goop between the coax and the shrink tubing.
> >
> >
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list