[time-nuts] ThunderBolt Display

[Mike Feher]

I sent an email to Andy from the web site and never heard back from him. -
Mike 

Mike B. Feher, EOZ Inc.
89 Arnold Blvd.
Howell, NJ, 07731
732-886-5960 office
908-902-3831 cell

-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of Eric Garner
Sent: Thursday, August 15, 2013 1:22 PM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] ThunderBolt Display

Is anyone else having difficulty submitting a request for an order form?


On Wed, Aug 14, 2013 at 10:36 AM, Chris Albertson <albertson.chris at gmail.com
> wrote:

> What was the problem you found.  Other then a "new to you" platform?  
> I'm trying to understand why reading serial data would be hard.
>
> An advantage of the Adruino is that you don't need to make a PCB.  
> Even if you want to do something like add a graphical display or and 
> SD card for logging they just plug in, no solder required.
>
> Of course the pre-buillt display is even easier but can't be modified.
>
> One of my loner term goals is to move lady heather like functions onto 
> a small uP based device.  It seems wasteful to use a PC for this.
>
>
> On Wed, Aug 14, 2013 at 10:16 AM, Russ Ramirez <russ.ramirez at gmail.com
> >wrote:
>
> > Yeah, after trying to (reliably) get the time out of the pertinent 
> > TSIP message using an Arduino UNO, I can understand your statement 
> > Adam about the Arduino approach. It kinda works, but it felt like I 
> > was fighting the implementation of the controller card and that I 
> > should cut-over to my
> own
> > solution using an Atmel, PIC or TI chip that I could just load C 
> > code
> into.
> > One of this lists members gave me the code I needed, so ironically 
> > using the UNO made the project more difficult.
> >
> > Russ
> > K0WFS
> > _______________________________________________
> > time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to 
> > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> > and follow the instructions there.
> >
>
>
>
> --
>
> Chris Albertson
> Redondo Beach, California
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to 
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>



-- 
--Eric
_________________________________________
Eric Garner
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.