[time-nuts] Can someone post the @@Ea messages from a Motorola Oncore UT just powered up?

[Peter Bell]

The board on it's own comes up in a mode that doesn't send anything until
it's initialized.  The RFTG-m-XO is responsible for setting up the board.
 This is what you see on the RX line after powerup:

Note that this is from WinOncore - the real data doesn't have the (Rx)
prefix and the data is in binary rather than hex.  After this, it repeats
with one @@En message sent for every 12 @@Ea messages


(Rx)@@Fa 8000
(Rx)@@Fa 8000
(Rx)@@Ea
081107E10C0000000000000000000000000000000000000000000000000000000081000009000000190000001B000000130000001600000014000000020000000500000009
(Rx)@@Aw 00
(Rx)@@Ay 00000000
(Rx)@@Az 00000000
(Rx)@@At 00
(Rx)@@Ag 0A
(Rx)@@En
3C01000D0100000100000000000000010102020000D0090000000019000000001B2FAF080013000000001600000000142FAF0800022FAF08000500000000
(Rx)@@Ea
081107E10C0005000000000000000000000000000000000000000000000000000081000009000000190000001B000000130000001600000014000000020000000500000009
(Rx)@@Ea
081107E10C000A000000000000000000000000000000000000000000000000000081000009000000190000001B000000130000001600000014000000020000000500000009
(Rx)@@Ea
081107E10C000F000000000000000000000000000000000000000000000000000081000009000000190000001B000000130000001600000014000000020000000500000009
(Rx)@@Ea
081107E10C0014000000000000000000000000000000000000000000000000000081000009000000190000001B000000130000001600000014000000020000000500000009
(Rx)@@Ea
081107E10C0019000000000000000000000000000000000000000000000000000081000009000000190000001B000000130000001600000014000000020000000500000009
(Rx)@@Ea
081107E10C001E000000000000000000000000000000000000000000000000000081000009000000190000001B000000130000001600000014000000020000000500000009
(Rx)@@Ea
081107E10C0023000000000000000000000000000000000000000000000000000081000009000000190000001B000000130000001600000014000000020000000500000009
(Rx)@@Ea
081107E10C0028000000000000000000000000000000000000000000000000000081000009000000190000001B000000130000001600000014000000020000000500000009
(Rx)@@Ea
081107E10C002D000000000000000000000000000000000000000000000000000081000009000000190000001B000000130000001600000014000000020000000500000009
(Rx)@@Ea
081107E10C0032000000000000000000000000000000000000000000000000000081000009000000190000001B000000130000001600000014000000020000000500000009
(Rx)@@Ea
081107E10C0037000000000000000000000000000000000000000000000000000081000009000000190000001B000000130000001600000014000000020000000500000009
(Rx)@@Ea
081107E10C0100000000000000000000000000000000000000000000000000000081000009000000190000001B000000130000001600000014000000020000000500000009



On Thu, Aug 22, 2013 at 8:44 PM, Alan Kamrowski II <alank2 at earthlink.net>wrote:

> Hi Everyone,
>
>
>
> I'm converting a Neo 6M GPS data stream to the Motorla Oncore UT data
> stream
> my RFTG expects.  When first turned on the 6M doesn't have a 1pps signal
> yet, but does post NMEA messages which lack data are invalid.  My question
> is, what does the binary data stream from a Motorola Oncore UT look like?
> It is binary so if anyone has one and can capture a power on in hex that
> would be very helpful.
>
>
>
> Thanks,
>
>
>
> Alan
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>