[time-nuts] Speaking of 5370s

[Don Latham]

I haven't looked on mine, but can you drill a 1/4 in hole and patch in
little pb switches? or patch in the common small 4-pin pcb switches?
looks ugly, of course, but...
Don

Bob Camp
> Hi
>
> Don't know if the switches are compatible, but the 5334 and 5335 are a
> lot more common than the 5345 and 5370. For that matter I'd bet there
> are a bunch of same era DVM's and such that have switches that might
> work.
>
> Bob
>
> On Aug 30, 2013, at 2:32 AM, Christopher Brown <cbrown at woods.net> wrote:
>
>>
>> Working on reviving a 5370B, have everything working except the
>> switches.  (multiple switches took impact damage).
>>
>>
>> So, if anyone has 5370 or 5345 front switch/control board(s) they want
>> to part with, let me know.
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to
>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>


-- 
“The power of accurate observation is commonly called cynicism by those
who have not got it.”
-George Bernard Shaw



Dr. Don Latham AJ7LL
Six Mile Systems LLC
17850 Six Mile Road
POB 134
Huson, MT, 59846
VOX 406-626-4304
Skype: buffler2
www.lightningforensics.com
www.sixmilesystems.com