[time-nuts] Locked onto LORAN 8970 GRI Monday AM

[paul swed]

I suspect my software version on the fs700 does not support the 2nd phase
menu that allows a longer then 1 sec offset count.
Regards
Paul.

On Mon, Feb 4, 2013 at 2:44 PM, paul swed <paulswedb at gmail.com> wrote:

> Boy LORAN austron2100 and 2100f and GPS HP3801are tracking really well.
> The Austrons are 1.5-2.0 E-12. Pretty much getting at there limits after 5
> hours.
>  Regards
> Paul.
>
>
> On Mon, Feb 4, 2013 at 11:31 AM, paul swed <paulswedb at gmail.com> wrote:
>
>> Stan indeed the srs700is locked and stabilizing. Fired up the austrons
>> also and they are locking. So is the LORAN workday 1000 to 1700 EST?? Or is
>> it a work week 1000 Monday to 1700 Friday?
>> Regards
>> Paul.
>>
>>
>> On Mon, Feb 4, 2013 at 10:33 AM, paul swed <paulswedb at gmail.com> wrote:
>>
>>> Yes indeed they are on the air.
>>> Must have had to have the coffee while the solid state finals warmed up.
>>> Looks like a 10am start of the day, like banks.
>>> Paul
>>> WB8TSL
>>>
>>>
>>> On Mon, Feb 4, 2013 at 10:05 AM, Stan, W1LE <stanw1le at verizon.net>wrote:
>>>
>>>> Have had lock onto slave Seneca for about 20 minutes on GRI 8970.
>>>> compared to GPS/DO: phase offset 3.6 degrees, freq offset 6E-11
>>>>
>>>> Stan, W1LE   Cape Cod
>>>>
>>>>
>>>> On 2/4/2013 9:48 AM, paul swed wrote:
>>>>
>>>>> Don't hear LORAN today
>>>>>
>>>>> On Sun, Feb 3, 2013 at 6:18 PM, Stan, W1LE <stanw1le at verizon.net>
>>>>> wrote:
>>>>>
>>>>>  Hello The Net:
>>>>>>
>>>>>> was able to get a lock onto this GRI but not the master station.
>>>>>>
>>>>>> GRI 9007 is the EIDI chain with slaves at BO, Norway, Jan Mayen, and
>>>>>> Vaerlandet also in Norway.
>>>>>>
>>>>>> Lock was short lived, but I will continue to monitor tonight.
>>>>>>
>>>>>> equipment:
>>>>>> 2 orthogonal delta loops, top terminated,
>>>>>> the SRS FS700 RX,
>>>>>> Austron multifilter (multcoupler 1X4)
>>>>>>
>>>>>> Stan, W1LE Cape Cod
>>>>>> ______________________________****_________________
>>>>>> time-nuts mailing list -- time-nuts at febo.com
>>>>>> To unsubscribe, go to https://www.febo.com/cgi-bin/****<https://www.febo.com/cgi-bin/**>
>>>>>> mailman/listinfo/time-nuts<htt**ps://www.febo.com/cgi-bin/**
>>>>>> mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts>
>>>>>> >
>>>>>> and follow the instructions there.
>>>>>>
>>>>>>  ______________________________**_________________
>>>>> time-nuts mailing list -- time-nuts at febo.com
>>>>> To unsubscribe, go to https://www.febo.com/cgi-bin/**
>>>>> mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts>
>>>>> and follow the instructions there.
>>>>>
>>>>>
>>>> ______________________________**_________________
>>>> time-nuts mailing list -- time-nuts at febo.com
>>>> To unsubscribe, go to https://www.febo.com/cgi-bin/**
>>>> mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts>
>>>> and follow the instructions there.
>>>>
>>>
>>>
>>
>