[time-nuts] Looking for Z3801

[Volker Esper]

 >...3805... better receiver...
Bear in mind, there are several versions out there with very different 
receivers and oscillators. I've got one with an 8-channel- and one with 
a 16-channel receiver.

Volker


Am 14.02.2013 22:12, schrieb Rex:
> Here is a Z3816a -- 271152849045
> I don't know the seller but has lots of sales.
>
> 3816 requires no serial configuration (like 3801) and has two 10 MHz 
> out standard. Several years back I came up with a mod to convert the 4 
> 19...MHz outputs to additional 10 MHz square outputs. -- 
> http://www.xertech.net/Projects/Z3816/3816_mod.html
>
> If the picture matches the unit, this one needs +20 to 72 V. I run 
> mine on +28V.
>
> 3805 is also good (better receiver) but I haven't looked for listings 
> today.
>
>
>
> On 2/14/2013 6:14 AM, Greg Broburg wrote:
>> Hello
>>
>> I am looking for a working Z3801 for a shop bench reference.
>>
>> Located in Minneapolis.
>>
>> I see that there is essentially nothing on eBay.
>>
>> Considering T-Bolt or Z3805 also.
>>
>> Greg
>>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to 
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
>