[time-nuts] altinex switches

[James Tucker]

Don;
I got one of those switchs;*very* nice product, great price. Wish I'd
bought two!
Do you have a reference for the mating connector for the RS232 by any
chance?

JimT

Sent from *my* galaxy (Nexus).
On Feb 21, 2013 4:13 PM, "Don Latham" <djl at montana.com> wrote:

> I don't have the manual source offhand, but it will be in my msg
> archived. The RS232 does respond, and can also be used to control the
> unit I have. I got a nice note from the seller; apparently the time-nuts
> snatched these units up in less than a day...and it was the seller who
> put me on to the manual, a typical Google got me nothing. I'll be home
> next week, and can supply the manual URL then if you can't find it.
> Don
>
> Robert LaJeunesse
> > I've been known to just stack a 150 Ohm 1% chip resistor on top of a 75
> > Ohm chip
> > resistor to bring the result down to 50 Ohms. Beats having to 1) remove
> > the old
> > part, 2) clean up the pads, then 3) get the new one soldered down.
> >
> > Bob L.
> >
> >
> >
> > ________________________________
> > From: Arthur Dent <golgarfrincham at yahoo.com>
> > To: "time-nuts at febo.com" <time-nuts at febo.com>
> > Sent: Thu, February 21, 2013 4:13:48 PM
> > Subject: [time-nuts] altinex switches
> >
> > ... it should be easy to switch it to 50 ohms although it may not make
> > any real
> > difference.
> > _______________________________________________
> > time-nuts mailing list -- time-nuts at febo.com
> > To unsubscribe, go to
> > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> > and follow the instructions there.
> >
>
>
> --
> "Neither the voice of authority nor the weight of reason and argument
> are as significant as experiment, for thence comes quiet to the mind."
> De Erroribus Medicorum, R. Bacon, 13th century.
> "If you don't know what it is, don't poke it."
> Ghost in the Shell
>
>
> Dr. Don Latham AJ7LL
> Six Mile Systems LLP
> 17850 Six Mile Road
> POB 134
> Huson, MT, 59846
> VOX 406-626-4304
> www.lightningforensics.com
> www.sixmilesystems.com
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>