[time-nuts] Hello and new Project

Scott McGrath scmcgrath at gmail.com
Fri Feb 22 18:06:31 UTC 2013


Recommend doing a reset to default and configure as directed there are a lot of configurable options which can control access to this box

Sent from my iPhone

On Feb 22, 2013, at 7:22 AM, Martin A Flynn <maflynn at theflynn.org> wrote:

> On 2/21/2013 10:16 PM, Mike S wrote:
>> On 2/21/2013 10:05 PM, Martin A Flynn wrote:
>>> Hi folks,
>>> I picked up a used TS-2100L for use at a local technology museum. Unit
>>> powers up, locks, and syncs. (all three front panel LED are green)
>>> 
>>> Using wire shark I can see traffic to the device on 192.168.56.99,
>>> however I can't connect to the management page.
>>> 
>>> Any suggestions on how to proceed?
>> 
>> Obvious questions - Can you ping it? Did you configure your PC to be on the same subnet (192.168.56.0/24)? Have you tried connecting to the serial console?
> PC on same subnet.  Tried factory-assembled straight and crossover serial cables, it will not connect  to serial port  "B".  I won't rule out the cables being pinned wrong.
> 
> Martin
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.



More information about the Time-nuts_lists.febo.com mailing list