[time-nuts] YIG oscillators

[Lizeth Norman]

It's actually for an amateur space downlink, Not quite C band but close!
Various mixers are available on the bay from cheep to the not so cheap.
Thanks for the tip regarding the Norsat LNBF. ! I'll let my fingers do
the walking.
Norm

On Fri, Jan 4, 2013 at 3:12 PM,  <lists at lazygranch.com> wrote:
> If you need that mixer for a LNBF, I believe that is close to the international C-band. Google around for a Norsat that ends in "I". They use it in India.
>
> -----Original Message-----
> From: Lizeth Norman <normanlizeth at gmail.com>
> Sender: time-nuts-bounces at febo.com
> Date: Fri, 4 Jan 2013 14:12:55
> To: Discussion of precise time and frequency measurement<time-nuts at febo.com>
> Reply-To: Discussion of precise time and frequency measurement
>         <time-nuts at febo.com>
> Subject: Re: [time-nuts] YIG oscillators
>
> Double balanced mixer!  Sorry for the silly overuse of abbreviations..
> Norm
>
> On Fri, Jan 4, 2013 at 2:10 PM, gary <lists at lazygranch.com> wrote:
>> dbm?
>>
>>
>>
>> On 1/4/2013 9:45 AM, Lizeth Norman wrote:
>>>
>>>
>>> I've actually purchased several of these with the thought of using
>>> them to drive the LO port of a dbm so that I can rx at 5.84GHz (as
>>> well as some other freq's)
>>
>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to
>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.