[time-nuts] Z3801A trouble

[Joseph Gray]

Well, it sort of worked. Now it won't come out of holdover. It's
telling me "1 PPS CLK Invalid: Time RAIM error". It also says "GPS
1PPS CLK Invalid".

Joe Gray
W5JG

On Sun, Jan 13, 2013 at 9:28 PM, Joseph Gray <jgray at zianet.com> wrote:
> Forcing the date on power up worked, although a bit strangely. I
> entered "2013,01,14" and got an "out of range" error. The date then
> showed as "14 Jan 2007" briefly, before showing "14 Jan 2013".
>
> Joe Gray
> W5JG
>
> On Sun, Jan 13, 2013 at 9:17 PM, Joseph Gray <jgray at zianet.com> wrote:
>> I just tried manually putting the unit into holdover and setting the
>> date. Same error. I'll have to try power cycling.
>>
>> Joe Gray
>> W5JG
>>
>> On Sun, Jan 13, 2013 at 8:57 PM, Hal Murray <hmurray at megapathdsl.net> wrote:
>>>
>>> jgray at zianet.com said:
>>>> I did that command earlier, but got an error. I just tried it again and I
>>>> get the same error:
>>>
>>>> -221 "Settings conflict"
>>>
>>> I don't remember any troubles.  I wasn't using anything complicated like
>>> SatStat.
>>>
>>> You might have to set the time when it doesn't know it.  Try power cycling
>>> and set the time before it finds the satellites and time.
>>>
>>>
>>> --
>>> These are my opinions.  I hate spam.
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> time-nuts mailing list -- time-nuts at febo.com
>>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>>> and follow the instructions there.
>>>