[time-nuts] time-nuts Digest, Vol 108, Issue 98

[Russ Ramirez]

Thanks Bjorn, you were exactly correct, somehow I did have the dBc/Hz
option selected.

Russ

------------------------------
>
> Message: 3
> Date: Sun, 21 Jul 2013 08:55:10 +0200
> From: "Bj?rn" <bg at lysator.liu.se>
> To: "Discussion of precise time and frequency measurement"
>         <time-nuts at febo.com>
> Subject: Re: [time-nuts] Tboltmon AMU range
> Message-ID:
>         <cf6856c9b389197bfc7755bbf6e8f3bf.squirrel at webmail.lysator.liu.se>
> Content-Type: text/plain;charset=iso-8859-1
>
> Hi Russ
>
> AMU is a Trimble invented quality unit. I once heard a professor describe
> it as "A Meaningless Unit".
>
> The Tbolt can change between AMU and dBc. With your range, the Tbolt has
> been switched to dBC, it is not showing AMUs.
>
> Approaching 50 with your high elevation SVs is excellent. You have a very
> good setup!
>
> If you wish to check it further, run Lady Heather with the "Signal
> Strength vs Az/El" plot enabled.
>
>     http://www.ke5fx.com/heather/readme.htm
>     http://www.mail-archive.com/time-nuts@febo.com/msg40567.html
>
> --
>     Bj?rn
>
> > I moved my Trimble bullet up the pole to have a 360 degree unobstructed
> > view and now the AMUs for the SVs are reading in the 39-50 range. Is this
> > too high or normal?
> >
> > Russ
> > _______________________________________________
> > time-nuts mailing list -- time-nuts at febo.com
> > To unsubscribe, go to
> > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> > and follow the instructions there.
>