[time-nuts] Cheap 9.8Mhz Sa.22c's

[Brian Alsop]

Manual is here and discusses PC interface and how to set to factory 
settings.  I think it may be a simple matter to bring back 10MHz.

http://www.rdrelectronics.com/skip/feb/SA22c.pdf

On 6/2/2013 18:13, Robert Atkinson wrote:
> Hi Magnus,
> According to the datasheet 10MHz is a standard output. The Manual say you can change the factory setting using SSIP ( Symmetricom Serial Interface Protocol).
> Unless of couse the particular units have been restricted. I don't thnik so as both the factory set frequency and 10MHz are coved by the standard unit.
>
> Robert G8RPI.
>
>
>
>
> ________________________________
>   From: Magnus Danielson <magnus at rubidium.dyndns.org>
> To: time-nuts at febo.com
> Sent: Sunday, 2 June 2013, 19:06
> Subject: Re: [time-nuts] Cheap 9.8Mhz Sa.22c's
>
>
> On 06/02/2013 07:52 PM, Mark C. Stephens wrote:
>> These are 9.8304Mhz, is possible to move them to 10Mhz?
>>
>> http://www.ebay.com/itm/Symmetricom-SA-22c-9-8304MHz-Precision-Rubidium-Oscillator-5V-and-15V-NICE-/261223397404
>
> I looked at it, and no. They change the core oscillator, and then you
> can alter the divide power of 2 but other than that no luck.
>
> This limits their uses outside the intended usage.
>
> Cheers,
> Magnus
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.2242 / Virus Database: 3184/5875 - Release Date: 06/01/13
>
>



-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2242 / Virus Database: 3184/5875 - Release Date: 06/01/13