[time-nuts] Connector For Trimble/Nortel GPSTM (NTGS50AA) ?

[Bob Camp]

Hi

That's what I have done. Cheaper and (hopefully) more reliable than a
connector.

Bob

-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of Frederick Bray
Sent: Monday, June 03, 2013 10:57 AM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] Connector For Trimble/Nortel GPSTM (NTGS50AA) ?

So, I gather that most folks are just connecting power to the 
appropriate 2 pins on the 110 position connector.  I wasn't sure whether 
people were wiring directly to the DC converter.

Thanks.

Fred


On 6/3/2013 3:53 AM, Erno Peres wrote:
>
> there is only a 48Volt connection and some unknown data com.... I did not
use any mating connector just the power in... everything is available on the
front plate.
>

_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.