[time-nuts] New to list and GPSDO questions

Volker Esper ailer2 at t-online.de
Thu Jun 13 17:57:22 UTC 2013


...but remember, you don't need 10kHz to get the control loop working. 
Since you need a time constant of some hours, the PPS output will do. 
Even more important is to use a good OCXO.

By the way: welcome to the list :-)

Volker


Am 13.06.2013 12:20, schrieb cfo:
> On Wed, 12 Jun 2013 20:29:26 -0700, Bob Stewart wrote:
>
>    
>> I saw on K3PGP's site a mention that the UT-41 GPS
>> receiver had a 10KHz signal on-board so I decided, why not build a GPSDO
>> for my "new" HP 5334B?  Unfortunately the one I bought doesn't have a
>> 10KHz point, and the board doesn't even pull out the 1PPS signal from
>> the chip.
>>      
> As a backup plan have a look at this one *Bay 290860812674
> It has 10Khz, afaik it's the one mentioned for the Miller GPSDO.
>
> Make sure also to get the Antenna cable that belongs to it.
>
> CFO
> Denmark
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.





More information about the Time-nuts_lists.febo.com mailing list