[time-nuts] WWVB remodulator for the Spectracom 8170...
gsteinba52 at aol.com
gsteinba52 at aol.com
Mon Jun 17 21:54:46 UTC 2013
I can never figure out how to post here...
This may not work. From what I remember, the "Atomic' wall clocks and watches only listen for WWVB a couple of times a day to conserve battery life - usually at night when propagation would be best. I don't know if the 60kHz signal is even available on a pin...
Jerry S.
Burt I. Weiner biwa at att.net
Mon Jun 17 13:56:17 EDT 2013
Previous message: [time-nuts] raspberry pi, adafruit gps & ntp
Next message: [time-nuts] WWVB remodulator for the Spectracom 8170...
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Chris,
I think Paul really came up with an elegant answer. As you well
know, the problem with the new format and phase locked receivers is
that WWVB's phase is now being shifted for the new encoding
scheme. It's this phase shifting that's messing up the phase locked
receivers like the Spectracom 8170. Part of Paul's circuit generates
a new 60 kHz signal that's not phase shifted. The receiver portion
of his circuit decodes the dips that WWVB still transmits, and
outputs the data which is used to turn on and off a "switch" that
drops the new 60 kHz signal by approximately 14 dB in sync with the
WWVB dips. I'm going to build this circuit, but I'm planning on
using the receive module out of one of the many "Atomic Clocks" that
I have around. I guess you could ask, Why don't I just put the
Atomic clock on the wall in my shoppe and forget about the 8170? An
honest answer to that is, that's no fun.
In a sense you could say that Paul's circuit does get the WWVB signal
to the receiver - it's just a new phase stable version of the signal
signal. This way I don't have to mess with the insides of the 8170.
Burt, K6OQK
More information about the Time-nuts_lists.febo.com
mailing list