[time-nuts] Regulator choices
Bob Stewart
bob at evoria.net
Sun Jun 30 16:30:12 UTC 2013
Hi Brian,
I also wanted to reduce the amount of power wasted through passive devices. As it turned out, though, I had more tolerance for heat waste than I had thought. But, the general discussion this has become is also good.
Bob - AE6RV
----- Original Message -----
> From: Brian Alsop <alsopb at nc.rr.com>
> To: Discussion of precise time and frequency measurement <time-nuts at febo.com>
> Cc:
> Sent: Sunday, June 30, 2013 10:48 AM
> Subject: Re: [time-nuts] Regulator choices
>
> Maybe I read the original posting wrong but I think this thread has
> departed greatly from the original posting.
>
> What I thought the posting said:
> 1) The already present transformer can produce ~20 V DC unregulated at
> sufficient current.
> 2) The desire was to have a 12 V regulated at somewhat greater than 1 amp.
>
> Though it wasn't raised in the first posting. A clean, non-switching
> supply was desirable for the poster.
>
> Thus, it isn't a case of attaching one regulator in series with another
>
> Regards
> Brian
More information about the Time-nuts_lists.febo.com
mailing list