[time-nuts] PTS 3200 remote programming

[Alan Melia]

Hi Iban do you have a manual? they are available. From memory because its a 
while since I worked on my Wavetek- Rockland unit I believe the remote 
programming is in parallel with the front panel switches. The reason for 
raising this is that there may be a problem on the back of the panel 
switches.....mabe a wire off. Does the 800Mhz front panel switch setting 
work correctly ??

Alan
G3NYK

----- Original Message ----- 
From: "Iban Cardona" <icardona at gmail.com>
To: <time-nuts at febo.com>
Sent: Friday, March 01, 2013 6:42 PM
Subject: [time-nuts] PTS 3200 remote programming


> Hi,
>
> I'm traying to use to program the bcd interface of a PTS 3200.
>
> My truble us tha the 100Mhz decade 8 value bit is ignored by the PTS,
> then if I send 800Mhz to the PTS dont get output, and if send 900Mhz
> then I get 100Mhz.
>
> I checked the unit and the hardware looks OK. And my code is working
> well in another PTS units like the 620.
>
> The 3200 have some trick?
>
> Thanks for all
>
> 73! Iban
> eb3frn
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to 
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.