[time-nuts] PTS 3200 remote programming
GandalfG8 at aol.com
GandalfG8 at aol.com
Fri Mar 1 20:46:52 UTC 2013
Hi Iban
I'm not sure that the programming data for the versions having decade
switches will apply to PTS3200, but the good news is I have a copy of the 3200
manual and will email that direct:-)
Regards
Nigel
GM8PZR
In a message dated 01/03/2013 18:51:24 GMT Standard Time,
icardona at gmail.com writes:
Hi,
I'm traying to use to program the bcd interface of a PTS 3200.
My truble us tha the 100Mhz decade 8 value bit is ignored by the PTS,
then if I send 800Mhz to the PTS dont get output, and if send 900Mhz
then I get 100Mhz.
I checked the unit and the hardware looks OK. And my code is working
well in another PTS units like the 620.
The 3200 have some trick?
Thanks for all
73! Iban
eb3frn
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list