[time-nuts] Measuring Phase diference between different GPSDO

[Mark C. Stephens]

According to http://www.realhamradio.com/z3801a-turning-point.htm they use a HP 3575A phase meter to perform the measurement.
Or perhaps I have misinterpreted the whole thing?


I do have a temperature controlled workshop that is always 24 degrees so hopefully thermal drift won't be too much of an issue.


mark

-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On Behalf Of lists at lazygranch.com
Sent: Friday, 3 May 2013 12:12 PM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] Measuring Phase diference between different GPSDO

Meditating on this a bit, I assume in a strict sense, you can only consider GPSDOs phase locked if they are disciplined from the same GPS.

Or is this being pedantic?

_______________________________________________
time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.