[time-nuts] Measuring Phase diference between different GPSDO
Mark C. Stephens
marks at non-stop.com.au
Fri May 3 14:04:06 UTC 2013
Now the trick is:
How to use the 5370B to measure the phase difference.
Anyone care to point me towards an APP note or two?!
mark
-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On Behalf Of John Miles
Sent: Friday, 3 May 2013 5:30 PM
To: 'Discussion of precise time and frequency measurement'; lists at lazygranch.com
Subject: Re: [time-nuts] Measuring Phase diference between different GPSDO
> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com]
> On Behalf Of Mark C. Stephens
> Sent: Thursday, May 02, 2013 9:29 PM
> To: lists at lazygranch.com; Discussion of precise time and frequency
> measurement
> Subject: Re: [time-nuts] Measuring Phase diference between different
> GPSDO
>
> According to http://www.realhamradio.com/z3801a-turning-point.htm they
> use a HP 3575A phase meter to perform the measurement.
> Or perhaps I have misinterpreted the whole thing?
5370Bs were a $20,000 instrument by the time they went out of production, so that's probably why HP recommended the use of a more economical phase meter.
Given that you have a 5370B, it's definitely the right thing to use.
-- john, KE5FX
Miles Design LLC
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list