[time-nuts] TimeLab PM6690 CNT9X?

[Tom Knox]

Thanks Magnus;
Do not go to any extra trouble on my account. The PM6690 also has a 53132A mode that may work. I assumed all this had been tried before and I could save a lot of time and effort
Best Wishes;
Thomas Knox



> Date: Fri, 10 May 2013 22:16:54 +0200
> From: magnus at rubidium.dyndns.org
> To: time-nuts at febo.com
> Subject: Re: [time-nuts] TimeLab PM6690 CNT9X?
> 
> Hi Tom,
> 
> On 05/10/2013 08:02 PM, Tom Knox wrote:
> > Has anyone used Time Lab with The current Fluke PM6690, Spectracom CNT90/91?
> > Thanks;
> 
> CNT90 (aka PM6690) did not use to work with TimeLab, as CNT90 does not 
> to talk-only, which is the normal requirement for TimeLab generic 
> counter support.
> 
> I don't remember if I managed to get it operating or not, but I could 
> take it for a test-spin if you like. The CNT-80 driver should work 
> thought, as it builds on the SCPI commandset.
> 
> Cheers,
> Magnus
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.