[time-nuts] FE-5680A control programs

Ziggy9 ziggy9 at pumpkinbrook.com
Fri May 24 12:06:02 UTC 2013


A few months ago Fabio Eboli posted some Python functions that might be useful. I haven't used or tested them myself, but they might be of interest. Still up on pastebin at

http://pastebin.com/download.php?i=VpZVuw0t

I don't know if Fabio has done any further work on this but perhaps he'll chime in here.

Paul

On May 24, 2013, at 0:22, Chris Albertson <albertson.chris at gmail.com> wrote:

> You have been collecting programs?  I did not know there were any to
> collect.  Do you have a list?   I don't have much use for a .exe file but
> is your are source codes available that would be great.
> 
> 
> On Thu, May 23, 2013 at 4:44 PM, EB4APL <eb4apl at cembreros.jazztel.es> wrote:
> 
>> Hello,
>> 
>> Since I bought my FE-5680A (10 MHz, 1 PPS variety), I have been collecting
>> control programs for it and keeping then in reserve.  Now that I'm going to
>> box it with a distribution amp I tried some of them, first of all to adjust
>> the frequency against the GPS.  I used Bob Campbel's VK4XV
>> "Fe5680Calibrator.exe" with good results.  I have other programs which
>> interrogates the device and shows the hex dumps, but I would like to know
>> if there is a windows program that allows to send other that the offset
>> related commands to the device and get the responses not in hex but
>> translated to plain language. In fact I don't know if there are
>> housekeeping commands for reading thinks like the lock status or the lamp
>> voltage like the analog outputs of the  FRS-C and others.
>> 
>> Thanks in advance,
>> Ignacio EB4APL
>> ______________________________**_________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/**
>> mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts>
>> and follow the instructions there.
> 
> 
> 
> -- 
> 
> Chris Albertson
> Redondo Beach, California
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.



More information about the Time-nuts_lists.febo.com mailing list