[time-nuts] FE-5680A control programs
Chuck Forsberg WA7KGX N2469R
caf at omen.com
Fri May 24 19:02:01 UTC 2013
I added a command to display or change the frequency offset to my ZCOMM
program.
To use it:
port 1
fe [new offset]
On 05/24/2013 05:06 AM, Ziggy9 wrote:
> A few months ago Fabio Eboli posted some Python functions that might be useful. I haven't used or tested them myself, but they might be of interest. Still up on pastebin at
>
> http://pastebin.com/download.php?i=VpZVuw0t
>
> I don't know if Fabio has done any further work on this but perhaps he'll chime in here.
>
> Paul
>
> On May 24, 2013, at 0:22, Chris Albertson <albertson.chris at gmail.com> wrote:
>
>> You have been collecting programs? I did not know there were any to
>> collect. Do you have a list? I don't have much use for a .exe file but
>> is your are source codes available that would be great.
>>
>>
>> On Thu, May 23, 2013 at 4:44 PM, EB4APL <eb4apl at cembreros.jazztel.es> wrote:
>>
>>> Hello,
>>>
>>> Since I bought my FE-5680A (10 MHz, 1 PPS variety), I have been collecting
>>> control programs for it and keeping then in reserve. Now that I'm going to
>>> box it with a distribution amp I tried some of them, first of all to adjust
>>> the frequency against the GPS. I used Bob Campbel's VK4XV
>>> "Fe5680Calibrator.exe" with good results. I have other programs which
>>> interrogates the device and shows the hex dumps, but I would like to know
>>> if there is a windows program that allows to send other that the offset
>>> related commands to the device and get the responses not in hex but
>>> translated to plain language. In fact I don't know if there are
>>> housekeeping commands for reading thinks like the lock status or the lamp
>>> voltage like the analog outputs of the FRS-C and others.
>>>
>>> Thanks in advance,
>>> Ignacio EB4APL
>>> ______________________________**_________________
>>> time-nuts mailing list -- time-nuts at febo.com
>>> To unsubscribe, go to https://www.febo.com/cgi-bin/**
>>> mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts>
>>> and follow the instructions there.
>>
>>
>> --
>>
>> Chris Albertson
>> Redondo Beach, California
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
--
Chuck Forsberg WA7KGX caf at omen.com www.omen.com
Developer of Industrial ZMODEM(Tm) for Embedded Applications
Omen Technology Inc "The High Reliability Software"
10255 NW Old Cornelius Pass Portland OR 97231 503-614-0430
More information about the Time-nuts_lists.febo.com
mailing list