[time-nuts] Z3815A

[Bob Camp]

Hi

That's more power that it should be pulling. It *should* be happy on
anything from about 20 to 60 volts. I run mine on 28 volts. Last time I
looked it was pulling well under an amp. How much under - don't remember. 

The "kit" version from China comes with a 24V 2.x A supply. As with any
OCXO, the power drops quite a bit after warm up.

Bob

-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of Mark C. Stephens
Sent: Tuesday, May 28, 2013 11:58 AM
To: time-nuts at febo.com
Subject: [time-nuts] Z3815A

Watch Out, I got hold of one..

I have powered it up and its drawing 52W @ 24v.

My question is, What is the input voltage range on the Z3815A?

Also, one for those familiar with the Z3815A,
"Holdover Uncertainty Predict:" is showing 2 dashes ( -- )
>From my experience with the Z380x clocks this usually is displayed right
after its locked to GPS.
Is there a problem with this unit, or the Z3815A won't ever display this, or
just give it some more time?


-marki

_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.