[time-nuts] Webinar: Phase Noise & Jitter Measurements by Rohde & Schwarz
Mike Feher
mfeher at eozinc.com
Thu Oct 3 20:36:41 UTC 2013
I use "antbar", which is free, to save video files. Regards - Mike
Mike B. Feher, EOZ Inc.
89 Arnold Blvd.
Howell, NJ, 07731
732-886-5960 office
908-902-3831 cell
-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of Dr. David Kirkby
Sent: Thursday, October 03, 2013 4:22 PM
To: Electronics and Books; Discussion of precise time and frequency
measurement
Subject: Re: [time-nuts] Webinar: Phase Noise & Jitter Measurements by Rohde
& Schwarz
I suspect there is software which will just capture whatever is on the
screen. Perhaps Google will find something.
It would seem a bit dumb for R+S to produce this, let 30 or so people look
at it, then not make it available to anyone else. That works out a lot of
money per person looking!!
I've never found the R+S site too useful for support, which is why I tend to
buy HP/Agilent and not R+S stuff. But maybe one could find out from R+S if
they intend to archive it.
Dave
On 3 October 2013 20:11, Electronics and Books
<electronicsandbooks at yahoo.com> wrote:
> I have tested the seminar this evening. Its a series of flash files with a
size of 20 - 50k. They can be saved in a hurry. I could not find a audio
file, its also one of the flash files. At the end all files are gone. Its
not very practical to save it.
>
>
>
>
>
>
> ________________________________
> From: Dr. David Kirkby <drkirkby at gmail.com>
> To: Discussion of precise time and frequency measurement
> <time-nuts at febo.com>
> Sent: Thursday, October 3, 2013 9:35 AM
> Subject: Re: [time-nuts] Webinar: Phase Noise & Jitter Measurements by
Rohde & Schwarz
>
>
> On 3 October 2013 02:26, Joseph Gray <jgray at zianet.com> wrote:
>> I won't be available when this is live. Do you know if the video will
>> be available afterwards?
>>
>> Joe Gray
>> W5JG
>
> Sorry, I don't know. You could ask either R+S or MW&RF. I know Agilent
> archive their webinars, but I've never seen one from R+S or WR&RF
> before, so I don't know if it will be archived.
>
> Typically these sort of things require one to enter a user name and
> password to view, so it is not something you can record on your own
> computer easily - if at all. It might be possible for someone else to
> record it. I must admit I don't know what software one could use to do
> it, but I suspect it must be technically, (though perhaps not
> legally), possible to record it.
>
>
> Dave
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list