[time-nuts] Need Fluke 6071A synthesizer info
Randy D. Hunt
randy_hunt960 at yahoo.com
Mon Oct 14 18:09:42 UTC 2013
On 10/14/2013 8:44 AM, ed breya wrote:
> I recently acquired a Fluke 6071A, and have found some pieces of the
> service and operating manuals, but not the schematics. Does anyone
> know where the schematics can be found? This unit looks pretty good
> except the "FREQ" and "UNCAL" indicators are flashing. I managed to
> decipher enough of the diagnostic error code info to find the
> "sub-synthesizer" loop is unlocked, and I hope that adjustment of its
> VCO will fix it. This section is of course buried inside the inner
> layers of the RF deck stack, so will be tricky to get at and rig for
> temporary running while opened up. The manual info is good for
> figuring this out, but the schematics would of course be a big help
> for this and future maintenance.
>
> Is there any kind of fluke-nuts group on febo.com? I think there's a
> fluke group at yahoo, but that stupid neo form of groups interface is
> so screwed up that I'm reluctant to join any more yahoo groups. I will
> probably have to try anyway for this one.
>
> I also vaguely recall that in recent months this model was noted as
> being pretty good in terms of phase noise for time-nuts purposes, but
> I couldn't find it in the discussions.
>
> Ed
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
The Fluke group on Yahoo is geared more to the meters. Arteck Media has
the complete manual available on CD-Rom. I wound up with 2 of them.
Randy, KI6WAS
More information about the Time-nuts_lists.febo.com
mailing list