[time-nuts] Low Allan Dev Oscillators
Said Jackson
saidjack at aol.com
Mon Sep 2 17:29:19 UTC 2013
Hello Steve,
Nice plots. Not bad ADEV. Not quite as good as a typical BVA, but respectable.
Who makes these and what package are they in?
Thanks,
Said
Sent From iPhone
On Sep 2, 2013, at 3:00, "Martyn Smith" <martyn at ptsyst.com> wrote:
> Hello,
>
> I mentioned about there being other low Allan Dev oscillators available on
> the market.
>
> Said asked me to supply some results (And Yes Said, I meant 1 x 10E-13)
>
> I'm not sure if attachments work on timeouts, so I have put a couple of
> graphs on my website.
>
> These graphs show typical results for our low noise 10 MHz oscillator.
>
> This oscillator hasn't been optimised specifically for Allan Dev or phase
> noise, just the best combination of both.
>
> We can achieve better phase noise at 1 Hz, -120 dBc being achievable, if we
> select the best oscillator from a batch.
>
> And the Allan Deviation is only after the oscillators have been on a day or
> so. They will improve if left on longer.
>
> www.ptsyst.com/10MHzPN-1.pdf
>
> We have improved the phase noise at 100 Hz and get about -156 dBc these days.
>
> www.ptsyst.com/10MHzAD-1.pdf
>
> Best Regards
>
> Steve
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list