[time-nuts] LPRO questions...
Alan Kamrowski II
alank2 at earthlink.net
Thu Sep 5 17:57:10 UTC 2013
Hi,
Well, I had it apart so I went ahead and tried the heating process on the
lamp. I don't see any splattering on the lamp at all of purple material,
but I added some masking tape to the threads and put it in a drill to rotate
it. I hit it with a hot air station at 350 deg C and rotated it for 60-90
seconds or so. The end result is a lamp that went from 3.5V to 3.7V.
Did I do it long enough or hot enough? The repair guide I saw said
something about a hot air gun and those can be 300-600 deg C...
Thanks,
Alan
More information about the Time-nuts_lists.febo.com
mailing list