[time-nuts] M12+T module questions

Jim Lux jimlux at earthlink.net
Fri Apr 4 23:58:41 EDT 2014


On 4/4/14 6:51 PM, Chris Albertson wrote:
> The data connector is a standard 0.05 inch double row of male headers.
> These are common but not nearly so common as the 0.1" type. I used a 2032
> coin cell battery and holder I un-soldered from an dead PC motherboard.
>   Even a coin cell will last its shelf life at least.
>
> You will need to level shift the serial data to/from the MT12 if you want
> to connect it to a PC.
>
>
I was able to get a sample from Samtec of the connector and a ribbon 
cable which I could then split out.





More information about the time-nuts mailing list