[time-nuts] CW12-TIM

Azelio Boriani azelio.boriani at screen.it
Sun Aug 31 13:12:24 EDT 2014


A "frequency set" command in WinOncore? The WinOncore was designed by
Motorola for their receivers using their binary command set, it is
very strange that this software can have a ConnorWinfield/Navsync
proprietary command
($PRTHS,FRQD,<frequency_in_MHz>[*optional_checksum]<cr><lf>) to set
the CW12 output frequency. A dedicated software is not needed: using
whatever serial terminal program, you just send the above command
using the keyboard and you can set any frequency upto 30MHz. For 10KHz
just type $PRTHS,FRQD,0.01<cr><lf> (the serial port is 38400,N,8,1).
The CW12-TIM must be the NMEA version.

On Sun, Aug 31, 2014 at 4:57 PM, Mike Seguin
<n1jez at burlingtontelecom.net> wrote:
> I got it. WinOncore. Frequency set.
>
> Mike
>
>
> On 8/31/2014 10:22 AM, Mike Seguin wrote:
>>
>> I just started working with a Navsync CW12-TIM. I'm interested in
>> programming the freq output.
>>
>> What's the best software to use?
>>
>> TIA
>> Mike
>
>
> --
>
> 73,
> Mike, N1JEZ
> "A closed mouth gathers no feet"
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.



More information about the time-nuts mailing list