[time-nuts] Lucent / Z3810A log time offset.

[Paul]

On Sun, Dec 7, 2014 at 10:26 AM, Bob Camp <kb8tq at n1k.org> wrote:

> Any time you have a power "burp" the clock will start back at what ever it
> thinks was the time was last.
>

I understand this.

I was referring to:


> > Log 037:20141201.00:25:47:  GPS reference valid at 20141202.01:47:41
> > Log 043:20141201.00:25:42:  GPS reference valid at 20141202.01:47:36
>

These two events were at least an hour apart.  The second one (1:47:36)
does not precede the first (1:47:41).

If "GPS reference valid" doesn't mean the Oncore thinks time is valid
that's okay but it only happened once and there have been multiple power
resets.  Just no others that (accidentally) happened within ~20 seconds
(the POST window I assume) of each other.

I'll wait a few days and do another power reset now that I'm ready for
concurrent monitoring of both units.

By the way the time glitch was only logged on REF 1.

Snippet showing the system adopting the bad time stamp:
Log 037:20141201.00:25:47:  GPS reference valid at 20141202.01:47:41
Log 038:20141202.01:48:45:  Locked mode entered
Log 043:20141201.00:25:42:  GPS reference valid at 20141202.01:47:36
Log 044:20141202.01:48:41:  Locked mode entered