[time-nuts] Frequency distribution isolation transformers YCL 20F001n arrived

[Gerhard Hoffmann]

Am 14.12.2014 um 18:46 schrieb Arthur Dent:
> Before you pooh-pooh these transformer/filters, try feeding a 10Mhz square
> wave into a one of these filters and check out the fairly clean sine wave
> you get out. These are handy cheap units and I have used them in the past
> as a quick and not so dirty way to clean up a 10Mhz signal.

 From a time nut pov this is probably less cleaning and more like infecting
with phase errors that drift along at the mercy of the temp. behaviour of
some unknown piece of ferrite.

regards, Gerhard

(who is just winding the Amidon cores for the 5 and 15 MHz traps of his
5->10MHz doubler for the new Lucent.  1812 chokes have failed big time.)