[time-nuts] New Acquisition: HP-53132A
Tom Knox
actast at hotmail.com
Sun Feb 2 04:01:30 UTC 2014
I know that with the ovenized oscillator the power supply (and therefore fan) are always on.
Thomas Knox
> Date: Sat, 1 Feb 2014 22:50:13 -0500
> From: stanw1le at verizon.net
> To: time-nuts at febo.com
> Subject: [time-nuts] New Acquisition: HP-53132A
>
> Hello The Net,
>
> I just got in the counter and the fan is always ON, even with the front
> panel switch OFF.
>
> I looked in the manual but could not find anyway to change this.
> The counter has the standard internal 10 MHz reference, but I will be
> using a Trimble T'bolt GPS/DO for the external reference.
>
> The fan is part of the power supply module. I can see a possible need
> for it if a premium ovenized reference is always ON.
> But I do not have the premium internal reference.
>
> Is there a way to only allow the fan to be ON, if the front panel switch
> is ON ? Possibly a jumper setting ?
>
> Are there any key strokes to determine the software version, other than
> a check sum ?
> I do not have the standard HP serial number, with the" vintage"
> (manufacturing date code) code first.
> The unit was manufactured in Korea.
>
> Stan, W1LE on Cape Cod
>
>
>
>
> ZZZZz
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list