[time-nuts] How I got my FE-5680A to lock in Sydney, Australia

Tom Harris celephicus at gmail.com
Thu Feb 6 22:31:20 EST 2014


I got into trouble once when we got a centrifuge from the US (I'm in
Australia) and it didn't work and I suggested to the Yanks that they should
have made it revolve in the opposite direction for working S on the
equator. The idiots tried this by rewiring the motor and the basket (the
large heavy casting that holds stuff to be centrifuged) promply unscrewed
itself and nearly came off the shaft. 30Kg of steel about 500mm in diameter
spinning at 5000rpm careening round the lab would not be much fun. I never
thought that there could actually be a real reason why things stuff up
across the equator.

Actually the vertical component of the magnetic field here has the opposite
sense, which is why compasses made for Europe are unusable in Australia,
the card just tries to align itself at 45 deg to the horizontal and refuses
to work as it fouls the internals of the mount, so this might make sense.


Tom Harris <celephicus at gmail.com>


On 7 February 2014 08:32, Jamieson (Jim) Rowe <jimrowe at optusnet.com.au>wrote:

> Hi again folks,
>
> You may (or may not) recall that a month or so ago, I asked for any
> information that might be available regarding how to fix a 'used' FE-5680A
> rubidium module from China (via ebay) which was tested by the supplier in
> China as working OK, but would not seem to lock up to rubidium here in
> Sydney. There wasn't a great deal of info available, it seems, so I kept on
> checking ideas myself - mostly with no luck. The module would never lock,
> but kept cycling back and forth between about 9.999770MHz and 10.000036MHz
> - 'searching' for a lock, but never finding it.
>
> Anyway, a couple of days ago I was reading more about the operation of
> rubidium vapour oscillators, and noticed that the 'filter cell' is very
> sensitive to magnetic fields - hence the mu-metal shielding case, and also
> for the 'C-tuning' coil. And I wondered if the main reason why the FE-5680A
>  had apparently worked in China, but wouldn't lock up in Sydney (Australia)
> might be caused by the fact that Quangzhou (China) is in the northern
> hemisphere while I'm 'down under' in the southern hemisphere - where the
> earth's field is presumably somewhat different, in terms of both strength
> and direction.
>
> So I decided to test this in a crude way, by inverting the FE-5680A and
> seeing what happened. And - lo and behold - it locked up within 2.5
> minutes, and stayed locked until I turned off the power and let it go cold
> again. The next morning I applied power again, and within 3 minutes it
> locked up again with no problems. And it's been locked up now for over 48
> hours...
>
> So it seems that the different magnetic field here may have been the
> problem - either that, or it may have received a 'jolt' in transit, which
> prevented in from locking unless it was inverted.
>
> But how do I tell which of these explanations is right, without 'opening
> her up' again and looking for some kind of subtle physical fault?
>
> Another idea: perhaps the mu-metal shield case had acquired a small dose
> of magnetisation in transit (via a physical shock, or from a strong field
> metal detector). I guess in this case that I would have to remove the two
> halves of the case, and bake them in a furnace to demagnetise them again.
>
> Or should I just run the FE-5680A upside down permanently - the simple but
> 'crude' answer?
>
> I'm not sure if this FE-5680A has the 'C-tuning' gizmo fitted, or wired
> up. Am I right in thinking that another approach might be to try varying
> the tuning via the RS-232C serial port? Does this work via the C-tuning
> coil anyway, or by tweaking the DDS?
>
> I hope a much more experienced time nut can provide a few answers, please.
>
> Jim Rowe
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.



More information about the time-nuts mailing list