[time-nuts] GPS W/10KHz
Dave Brown
tractorb at ihug.co.nz
Sun Feb 9 07:40:20 UTC 2014
Re Bob's comments- This article is relevant.
http://www.g4jnt.com/10MHz_Reference_Source_Stability.pdf
DaveB, NZ
----- Original Message -----
From: "Bob Camp" <lists at rtty.us>
To: "Discussion of precise time and frequency measurement"
<time-nuts at febo.com>
Sent: Sunday, February 09, 2014 5:22 AM
Subject: Re: [time-nuts] GPS W/10KHz
Hi
The 10 KHz that these modules put out is not very “clean” in terms of
driving a synthesizer. If you are looking at taking it straight to RF (as in
driving a VHF radio), you likely will be less than happy with the result.
Bob
On Feb 8, 2014, at 8:02 AM, Alex Pummer <alex at pcscons.com> wrote:
> Thank you very much,
> 73
> KJ6UHN
> Alex
>
> On 2/7/2014 8:10 PM, Perry Sandeen wrote:
>>
>> List,
>>
>> Wrote: where is a good source of GPS receiver modules I need one which
>> has 10kHz output to phase lock a quartz oscillator.
>>
>>
>> Fluke.1 Motorola ONCORE M12+T timing gps receiver
>> 1pps 100hz eBay item number:290656401551
>> Also RDR
>> There is another china seller that has them(10KHz)
>> with leads for $90 but is almost impossible to find. Last time I
>> searched it took me a hour. But he has a wide assortment. I forgot to
>> bookmark
>> his site.
>> Regards,
>> Perrier
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to
>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list