[time-nuts] FE-5680A sweep range setting
Ed Palmer
ed_palmer at sasktel.net
Mon Feb 24 03:33:57 UTC 2014
I also have a 5680A with that strange little board. On a hunch, I
disconnected the orange wire and injected a DC voltage into the main
board. It caused the frequency to change. I don't know if it's the
C-field control or another mechanism, but the result is the same.
Ed
On 2/23/2014 4:01 PM, Simon Lyons wrote:
> OK ... I have C245 on the middle board, same as you. Tweaking it and ...
>
> Hmmm, it does affect the range (twitchy is an understatement!) but
> still no lock. To be continued....
>
> Now by the 'frequency control board' do you mean the board that
> overlaps the top of the D-Sub connector? I have been at a loss to
> understand this section. There is all sorts of silicon on it but no
> inputs of any kind. Just a 5V supply and a single analog output of
> 1.99V on the orange wire. I'm baffled, so if you know what this board
> is doing, please tell!
>
More information about the Time-nuts_lists.febo.com
mailing list