[time-nuts] Loran-C radio navigation

[paul swed]

OK I downloaded the gz file and see additional information.
Thanks


On Mon, Jan 13, 2014 at 3:50 PM, paul swed <paulswedb at gmail.com> wrote:

> Matthias
> I live in the US on the east coast and do on occasion receive LORAN C from
> Europe. But we have a new LORAN occasionally here that behaves much as the
> old did though its for time and frequency only.
>
> Further sitting next to me are 3 X launchpads MSP430s that were so
> inexpensive I could not resist picking them up. Though didn't do a thing
> with them. Time in the day issue.
>
> Finally you wrote your program in Forth. Always liked Forth allot.
>
> So all of that said are there instructions for loading it onto the
> launchpad?
> Whats required on the frontend from the antenna to the port?
> I also have a real LORAN C simulator and also a test set.
>
> Regards
> Paul
> WB8TSL
> .
>
>
> On Mon, Jan 13, 2014 at 11:11 AM, Matthias Koch <
> matthias.koch at hot.uni-hannover.de> wrote:
>
>> Dear timing geeks and frequency wizards,
>>
>> I wish to announce a software defined Loran-C longwave radio navigation
>> receiver running on STM32F407 ! If you happen to live somewhere on earth
>> with Loran-C signal coverage like Europe and parts of Asia, I would like to
>> get in contact with you for beta testing out in the wild.
>>
>> The first experimental release is available now on download section on
>> http://mecrisp.sourceforge.net/
>> I have been invited to this list by a discussion on
>> http://forum.stellarisiti.com/topic/1807-loran-c-radio-navigation/
>>
>> Best wishes from Germany,
>> Matthias Koch
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/
>> mailman/listinfo/time-nuts
>> and follow the instructions there.
>>
>
>