[time-nuts] Loran-C radio navigation

[paul swed]

Mathias OK I see that I need a different board then.
Let me take a look. I think thats the $12 board


On Tue, Jan 14, 2014 at 6:14 AM, Matthias Koch <
matthias.koch at hot.uni-hannover.de> wrote:

> Dear Paul,
>
> thank you ! Instructions are included in the source package, you will need
> a signal of about 1.5V DC and 0.5V amplitude. The analog-digital converters
> are single ended and accept voltage levels between GND and Vcc which is
> about 3V.
>
> You can enjoy my native code Forth compiler on the MSP430 Launchpads, too,
> and try Ledcomm, but for Loran-C you need a STM32F407 Discovery board which
> has enough RAM for circular GRI buffer.
>
> I would be glad if you could sample signals with your Loran-C simulator to
> check if it is running fine.
>
> Matthias
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/
> mailman/listinfo/time-nuts
> and follow the instructions there.
>